Omnipure
Omnipure - K2386 - 6" x 2" GAC With Phosphate Inline Filter
$17.05
The Omnipure K-Series K2386 inline filter is a GAC and phosphate inline water filter. It comes 1/4 QC and 3/8" QC fittings that make this filter really easy to install and replace. It aids in the removal of taste and odor in your water also helps remove chlorine taste and odor.
*NOTE: A very common misconception is that a 1/4" NPT measures as 1/4 inch on a ruler or tape measurer. However, that is not the case. NPT will measure larger in diameter. Above is a sizing reference to help clarify.
- Dimensions: 2" W X 6" L
- Flow Rate: .5 GPM
- Maximum Pressure: 125 PSI
- Maximum Temperature: 100 F
- Service Life: 6 Months or 750 Gallons
- Filtration Media: Granulated Activated Carbon with Polyphosphate Scale Inhibitor
- Reduces: Chlorine Taste & Odor
- Reduces: Particulates Class 1
- Reduces: Scale and Lime Scale
- Volume Cubic Inch: 9.5
- Fitting Size: 1/4" FQC and 3/8" FQC
- Omnipure K2386 has been tested for performance under NSF Standard 42.
| National Pipe Thread (NPT) Size Measured Against a Ruler* | |
|
 Actual Diameter (Inches) |
National Pipe Thread (NPT) (Fractional) |
| 0.405" | 1/8" |
| 0.540" | 1/4" |
| 0.675" | 3/8" |
| 0.840" | 1/2" |
