ADDRESS: 515 N. Fairview St, Santa Ana, CA 92703 | PHONE: (714) 541-6600 | SHOP NOW

Watts

Watts (R13-1200) R13 Series Reverse Osmosis 1200 GPD System

Product Code R13-1200

$6,134.12
Additional Details

Watts R13-1200 R13 Series: Best for Large Capacity and Effective Filtration.

Reverse osmosis systems are highly regarded for their effectiveness and efficiency in water treatment. The Watts R13-1200 R13 Series is one of the best because of its large capacity and effective filtration.
 
A powerful reverse osmosis system, the Watts R13-1200 can purify water at a rate of 1200 GPD. It is designed to purify water by removing pollutants, dissolved solids, and other impurities, making it suitable for drinking and other uses. If you need to filter a lot of water, this system is for you.  

The principle of reverse osmosis is key to the R13-1200's water purification system. Here, we use a semipermeable membrane to filter out impurities while letting through clean water molecules. In order to improve the water quality prior to reaching the RO membrane, the R13-1200 incorporates various stages of filtration, such as carbon and sediment filters. 
 
Skill in plumbing and water systems is necessary for installing the R13-1200. All you need are the commonplace tools and fittings that are included with the system, and the instructions are thorough. For best results and warranty protection, have a professional handle the installation. 
 
If your company needs a solution to purify water in bulk, look no further than the Watts R13-1200 R13 Series Reverse Osmosis (1200 GPD System). Consistent availability to safe drinking water across multiple industries is guaranteed by its versatile design, effective filtration process, and sturdy construction.




The R13-1200 Reverse Osmosis System has features that are normally reserved for much larger and more expensive RO systems. The system shown includes an optional leg kit. R-13 Compact Wall Mount RO Reverse Osmosis System features a 1200 gallon per day capacity.

Standard features:

  • Powder coated steel frames 
  • Inlet solenoid valve 
  • Pre-filter 
  • 1/2 HP motor 
  • Brass pump 
  • Liquid filled pre-filter pressure gauge 
  • 2 1/2" liquid filled pump pressure gauge 
  • Product water & reject water flow meters 
  • High pressure, non-metallic membrane housings 
  • SS needle valves for concentrate and recycle lines 
  • Stainless steel product water check valve 
  • On / off toggle switch 
  • Low-pressure shut-off with auto restart 
  • Feed water and product water TDS monitor

Specifications

  • Feed water connection3/4" NPTF
  • Product water connection3/8" Tubing OD
  • Reject water connection3/8" Tubing OD
  • Feed water required (max.)2.4 GPM
  • Feed water pressure (min.)10 PSI
  • Drain required (max.)2.4 GPM
  • Electrical requirements120 VAC 60 Hz
  • Current8 Amps
  • Pump1/2 Horsepower
  • Maximum production1200 gallons per day
  • Average membrane rejection rate96 to 98%
  • Recovery (adjustable)34 to 75%
  • Membrane size3" x 20" nominal
  • Number of membranes2
  • Pre-filter20" x 2.5" x 5 micron melt blown polypropylene

 

Â